Roll over to zoom
$699
In stock
Sold out. Get an email the day it's back.
Thanks — we'll email you when it's back.
📦
Stock Availability
Pakenham Store
1 in stock
Checking availability…
Confirm your email
Your request is saved. Check your inbox for a six-digit code to activate this alert.
Enter the six-digit code from the email we sent you.
You’re on the list
You’re signed up for stock updates on this item. You can change or stop this alert any time.
Alert stopped
This stock alert has been stopped.
Manage this alert
“Stop all my alerts” ends every stock alert for your email in this store.
Product details
Arken SH4 4-16X50 GEN2 FFP
Specification:
Magnification: 4-16x
Objective Diameter: 50 mm
Eye Relief: 3.6 inches
Field of View: 30-7.5 ft @100 Yards
Tube Size: 34 mm
Turret Adjustment: 1/4 MOA / 1/10MIL
Reticle Position: First Focal Plane
Reticle Details: VPR MOA / VPR MIL
Zero Stop: AZS Zero Stop System
Zero Reset: Yes
Elevation Adj. Range: 123 MOA / 36 MIL
Windage Adj. Range: 50 MOA / 14 MIL
Adjustment Per Revolution: 20 MOA / 8 MIL
Parallax: Side Parallax Adjustment 25 Yds – Infinity
Illuminated Reticle: Red
Turret Rotation: Counter Clockwise (CCW)
Length: 13.4 inches
Color: Matte Black
Weight: 35.6 oz
Sunshade Included: yes
Lifetime Warranty
Precision Tracking Guaranteed
First Focal Plane (FFP)
Zero Stop
Specification:
Magnification: 4-16x
Objective Diameter: 50 mm
Eye Relief: 3.6 inches
Field of View: 30-7.5 ft @100 Yards
Tube Size: 34 mm
Turret Adjustment: 1/4 MOA / 1/10MIL
Reticle Position: First Focal Plane
Reticle Details: VPR MOA / VPR MIL
Zero Stop: AZS Zero Stop System
Zero Reset: Yes
Elevation Adj. Range: 123 MOA / 36 MIL
Windage Adj. Range: 50 MOA / 14 MIL
Adjustment Per Revolution: 20 MOA / 8 MIL
Parallax: Side Parallax Adjustment 25 Yds – Infinity
Illuminated Reticle: Red
Turret Rotation: Counter Clockwise (CCW)
Length: 13.4 inches
Color: Matte Black
Weight: 35.6 oz
Sunshade Included: yes
Lifetime Warranty
Precision Tracking Guaranteed
First Focal Plane (FFP)
Zero Stop
How it fits together
Assembly guide
Your clip-on
- The partsNocpix MATE clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the MATE.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorScrew the MCR-M52 connector onto the MATE's M52×0.75 thread at the eyepiece end.Role of the MATE's adapter locked ring, and MCR-M52 vs MCR-M52P, to confirm
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the MATE fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The MATE itself doesn't rotate.
- Set up and zeroCheck the Eyepiece menu is on Clip on mode (the factory default), then zero the MATE in profile 1 to 8 in the Zeroing menu.
- The partsHIKMICRO Thunder TH35C 3.0 clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the Thunder. HIKMICRO rates this model for day scopes of 1-12×.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorScrew the MCR-M52 connector clockwise onto the Thunder's M52×0.75 thread, then tighten the fixing ring with the wrench that comes with the Thunder.
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the Thunder fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The Thunder itself doesn't rotate.
- Set up and zeroSet the eyepiece type to Clip-On (Menu › Advanced Settings, or double-press the Mode key), then use Calibrate Image to line the thermal image up with the day-scope reticle.
- The partsHIKMICRO Thunder TQ35CL 3.0 clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the Thunder. HIKMICRO rates this model for day scopes of 1-15×.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorScrew the MCR-M52 connector clockwise onto the Thunder's M52×0.75 thread, then tighten the fixing ring with the wrench that comes with the Thunder.
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the Thunder fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The Thunder itself doesn't rotate.
- Set up and zeroSet the eyepiece type to Clip-On (Menu › Advanced Settings, or double-press the Mode key), then use Calibrate Image to line the thermal image up with the day-scope reticle.
- The partsHIKMICRO Thunder TQ50CL 3.0 clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the Thunder. HIKMICRO rates this model for day scopes of 1-15×.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorScrew the MCR-M52 connector clockwise onto the Thunder's M52×0.75 thread, then tighten the fixing ring with the wrench that comes with the Thunder.
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the Thunder fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The Thunder itself doesn't rotate.
- Set up and zeroSet the eyepiece type to Clip-On (Menu › Advanced Settings, or double-press the Mode key), then use Calibrate Image to line the thermal image up with the day-scope reticle.
- The partsThermTec Hunt 650 Pro clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the Hunt. ThermTec rates this model for day scopes of 1-16×.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorScrew the MCR-M52 connector onto the Hunt's M52×0.75 thread.Whether the Hunt's eyepiece bayonet-type ring stays fitted under the Rusan connector: to confirm
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the Hunt fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The Hunt itself doesn't rotate.
- Set up and zeroCheck Menu › Eyepiece Type is on Clip-on, pick a profile in Menu › Zero Profile, then use Zeroing to shift the thermal image with + / − onto the day scope’s point of impact at 100 m.
- The partsThermTec Hunt 335 Pro clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the Hunt. ThermTec rates this model for day scopes of 1-12×.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorScrew the MCR-M52 connector onto the Hunt's M52×0.75 thread.Whether the Hunt's eyepiece bayonet-type ring stays fitted under the Rusan connector: to confirm
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the Hunt fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The Hunt itself doesn't rotate.
- Set up and zeroCheck Menu › Eyepiece Type is on Clip-on, pick a profile in Menu › Zero Profile, then use Zeroing to shift the thermal image with + / − onto the day scope’s point of impact at 100 m.
- The partsThermTec Hunt 650L clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the Hunt. ThermTec rates this model for day scopes of 1-16×.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorScrew the MCR-M52 connector onto the Hunt's M52×0.75 thread.Whether the Hunt's eyepiece bayonet-type ring stays fitted under the Rusan connector: to confirm
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the Hunt fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The Hunt itself doesn't rotate.
- Set up and zeroCheck Menu › Eyepiece Type is on Clip-on, pick a profile in Menu › Zero Profile, then use Zeroing to shift the thermal image with + / − onto the day scope’s point of impact at 100 m.
- The partsZEISS DTC 3/38 clip-on, Rusan MCR-M52 modular connector, Rusan MAR modular clamp sized to the scope, and an Arken SH4 4-16x50 GEN2 riflescope.SH4 objective Ø ≈59 mm, read off Arken's product render: confirm with calipers before ordering the clamp
- Zero the day scopeMake sure the day scope is zeroed before you fit the DTC.
- Pick the clamp sizeMeasure the outer diameter of the scope's objective and choose the Rusan MAR clamp in that size (Rusan makes 58, 58.4 and 59 mm).
- Fit the connectorTurn the DTC's lock ring clockwise, back towards the body, to expose the M52 thread. Hand-tighten the MCR-M52 connector clockwise onto the thread, then turn the lock ring counter-clockwise against the connector to lock it.Rusan's catalogue doesn't list the DTC (only retailer copy does) and ZEISS doesn't publish the thread pitch: fit to confirm
- Fit the clampSlide the clamp over the objective bell and close the quick-release lever.Clamp seating position on the bell to confirm
- Lock it onLine up the arrows on the connector and clamp, push the DTC fully in, then turn the clamp's front ring against its UNLOCK arrow to lock. The DTC itself doesn't rotate.
- Set up and zeroSwitch the DTC on and align the thermal image with the day-scope reticle.The DTC's menu path for image alignment: to confirm from the ZEISS manual
Sources
- Nocpix MATE Series User Manual: components, installation and the Eyepiece menu.
- Rusan product catalogue 02/2024: modular clamp, connector and ocular.
- HIKMICRO Thunder 3.0 user manual: M52×0.75 adapter, fixing ring, eyepiece type and Calibrate Image.
- ThermTec Hunt Pro series user manual: M52×0.75 thread, bayonet-type ring, Zero Profile and Eyepiece Type.
- ZEISS DTC 3/38 instruction manual (reproduced by Optics Trade): lock ring and adapter fitting.
- Rusan modular adapter description (Venari): push-and-twist bayonet and alignment arrows.
Questions about this scope?
Ask someone who’s used it in the field.
REVIEWS
